This listing is intended for replacement component ONLY and is NOT a mask system.
The Ultra Mirage™ Full Face Mask Elbow Retainer Clip is the replacement retainer clip (or split washer) that holds the elbow swivel in place on the Ultra Mirage Full Face mask.
This is the elbow retainer clip only and does not include any other items.
Replacement elbow clip used to hold the anti-asphyxia elbow to the Ultra Mirage Full Face mask frame.
The elbow is inserted into the mask frame and then the clip is secured around the elbow on the inside of the mask.
The two flanges are handles which allow you to pull the elbow clip apart in order to fit it around the elbow and to take it off the elbow if you ever need to.
Follow these instructions to easily secure the elbow clip during installation of the elbow:
- hold the mask frame upside down with the inside of the mask facing you
- insert the anti-asphyxia elbow into the the mask frame on the outside of the mask
- while holding the anti-asphyxia elbow in place with one or both hands, use your other hands or free fingers and thumbs to attach the elbow clip on the inside of the mask, making sure the flanges are pointing up (toward the bottom of the mask) and also making sure you tuck the portion of the elbow clip away from the flanges (i.e. the closed side of the elbow clip) under the ridge of the elbow first.
- After the closed side of the elbow clip is inserted under the ridge of the elbow, simply press the remaining portions of the elbow clip down under the ridge of the elbow
(pressing toward the flanges of the clip)
To remove the elbow clip and the elbow follow these steps:
- hold the mask with two hands upside down with the inside of the mask facing you
- with your forefingers grab the flanges of the elbow clip and pull them apart firmly
- using your thumb lift the closed portion of the elbow clip out from under the ridge of the anti-asphyxia elbow and continue to lift the elbow clip until the entire clip is disengaged from the elbow.