ResMed has long been known for designing the most comfortable CPAP mask interfaces on the market and the streak continues with the new AirFit™ series N30i nasal style CPAP mask.
The N30i is unique in the sense that it could be called a nasal pillow OR nasal mask. the curved cradle cushion offers a seal that is less invasive and unlike a nasal pillow it does not use inserts that go directly into the nostrils. The minimal parts to this mask make it lightweight and the CPAP user barely notices it there as opposed to traditional style nasal masks that tend to be bulky with too much weight.
The top of the head tube design is one the most notable features as it allows the user to sleep in any position without the interference of tubing that can sometimes get tangled in the bed.
The tubing that connects to the elbow connector at the top of the head delivers air pressure throughout the mask frame on both sides. If a user sleeps on one side and reduces pressure on that side the CPAP pressure is compensated to deliver on the unobstructed side.
PLEASE READ: It is important to note that the AirFit N30i is compatible with any manufacturer of standard CPAP, Auto CPAP, or Bi-Level devices such as Philips Respironics and Fisher & Paykel HOWEVER it is not compatible with certain travel CPAP machines such as the ResMed AirMini
Special Features of the AirFit N30i
Included with This Purchase
(1) AirFit N30i Nasal Mask Frame (in selected size)
(1) Headgear Strap
(1) Elbow Tube Connector
(3) Cushions (Small, Medium, and Small-Wide)
FAQs about the AirFit N30i
Q: How do I clean the AirFit N30i?
A: Cleaning the AirFit N30i is similar to cleaning other CPAP masks. When the elbow, headgear and cushion are removed from the frame, the AirFit™ N30i frame is one component that can be cleaned in a similar way as the short tube of other nasal masks or the long CPAP tubing. Wash all components with warm water and mild liquid detergent, rinse thoroughly and let air dry. For the frame sleeves, squeeze with a clean towel to remove excess water.
Q: Which mask setting do I use for the AirFit™ N30i?
A: The AirFit™ N30i will use the "Pillows" setting for AirSense™ 10, AirCurve™ 10 and S9™ series of PAP machines.
Q: Can I use a chin strap with this mask?
A: Yes, a chin strap may be used with the AirFit™ N30i. If using a chin strap, it should not occlude the frame (i.e. it can be used under the mask frame). There is a risk of sub-optimal to no-therapy if both sides of the frame are occluded by the chin strap.
BROCHURE - AirFit™ N30i
USER GUIDE - AirFit™ N30i
How to put together the various CPAP mask parts of your ResMed AirFit N30i.
Follow these assembly instructions so you can begin using your minimal-contact nasal cradle CPAP mask for sleep apnea therapy.
Step 1 - Ensure you have all the mask components and parts together.
Step 2 - Connect the elbow to the frame.
Step 3 - Thread the left end of the headgear into the left side of the frame and fasten the tab.
Step 4 - Thread the right end of the headgear into the right side of the frame and fasten the tab.
Step 5 - Insert the ends of the frame into the cushion, ensuring that the arrows on the cushion and frame are aligned.
Note: If the elbow ring detaches, re-insert into the top of the frame.
These instructions are for general information purposes only.
For full details please consult the user guide.
How to take apart the various CPAP mask parts of your ResMed AirFit N30i.
Follow these disassembly instructions for your minimal-contact nasal cradle CPAP mask.
Step 1 - Ensure your mask is disconnected from your machine.
Step 2 - Pull the cushion out from one end of the frame.
Step 3 - Pull the cushion out from the other end of the frame.
Step 4 - Unfasten the headgear tab from one side and pull it out of the frame.
Step 5 - Unfasten the headgear tab from the other side and pull it out of the frame.
Step 6 - Squeeze the side buttons on the elbow and pull up to release it from the frame.
These instructions are for general information purposes only.
For full details please consult the user guide.
How to fine-tune the fit of your ResMed AirFit N30i minimal-contact nasal cradle mask so you can begin using CPAP therapy more comfortably on the first night.
Step 1 - Pull the frame and headgear over your head until the elbow is positioned on top and the headgear is behind your head.
Step 2 - Place the cushion under your nose.
Step 3 - Tighten or loosen the headgear until the cushion fits comfortably under your nose.
Step 4 - Squeeze the side buttons on the elbow and detach from the frame. Connect the air tubing from your device to the elbow, then reattach to the frame.
These instructions are for general information purpose only. For full details please consult the user guide.
How to manage mask leaks when your ResMed AirFit N30i minimal-contact nasal cradle mask is compromised by movement, incorrect fitting or improper sizing. Includes CPAP mask adjustment tips.
Step 1 - Locate where the air is escaping from, which is typically above or below the cushion.
Step 2 - Adjust the cushion by gently pulling it away from your face and letting it reseal itself.
Step 3 - Adjust the headgear as needed to achieve a more secure seal.
Step 4 - Check the frame is secure and that the mask elbow and tubing are not pulling on the mask.
These instructions are for general information purpose only.
For full details please consult the user guide.
SELECT THE RIGHT CUSHION SIZE
SELECT THE RIGHT SELF - ADJUSTING FRAME SIZE